Accuphase AD-50 Phono Equaliser plug-in board for compatible Accuphase amplifiers. The AD-50 is Accuphase's 5th generation dedicated Phono Input Board and - in addition to refinements musical insight and depth - the AD-50's ultra low noise performance comes remarkably close to the reference Phono Stage, the C-37.

The Melco D100 embeds the most recent generation of Japanese optical drive which reads CD and Optical Discs with great precision and ultra-low noise in operation. Unlike off-the-shelf optical drives that require suitable software to obtain a bit-perfect rip, the D100 is pure plug and Play when used with a compatible Melco music library (such as the <a...

The Melco E100 Expansion Drive is designed to add a further 3TB of storage to your compatible Melco Music Library. Thanks to the carefully chosen 3TB HDD (supported using with MELCO Highly Stable Storage System to minimise vibration) and fed by a custom circuit board that is optimised minimal noise entering back into the replay chain - the extra capacity does not come...

END OF LINE/DISCONTINUED Naim HiCap DR Power Supply The new DR version of the HiCap has been reviewed and updated, now features revised transformer mountings, wire gauge, wire routing, mechanical decoupling, internal layout and reservoir capacitors. A fantastic upgrade for...

The NPX 300 powers your system in a silent, fluid way, allowing the preamplifier to concentrate on its main task: controlling the signal. In addition to improving the performance of the NSC 222 preamplifier and streamer, the NPX 300 can be used to upgrade several Naim products, lending them immense flexibility over time. It is also upgradable, as it is also...

END OF LINE/DISCONTINUED As iconic as it is widely acclaimed, the SuperCap DR is a Naim Audio classic, capable of powering most preamplifiers in Naim's range (except for the NAC-N 172 XS and NAC 552), but really comes into it's own with the <a...

Based on trickled down technology from the flagship Elite range of balanced DC power supply, Plixir's Elementa DC power supply is their most cost effective DC power supply solution. With a dual voltage regulation stage and high quality parts including a custom Noratel transformer, it is still highly superior to most off-the-shelf DC power supply in the market that...

The PLiXiR Elite BDC balanced DC power supply is designed to give a stable, low noise DC supply - essential in extracting the best performance from your connected component, and minimising noise creeping into the rest of your system. We strongly recommend Plixir power supplies for Melco 12V products.

PLiXiR Statement DC upgrade cable for Melco N10 , N10 Anniversary or N10/2 Music Libraries. 3 Runs of Statement DC cable is used to make this special cable. Conductors are silver plated high purity copper, with full Teflon dielectric, made to military spec. 5 pin Neutrik GOLD PLATED XLR connectors...

The BT Box S2 HD is a next generation, high-definition Bluetooth receiver, using latest technologies like Bluetooth 5.0 and aptX-HD for elevating your mobile Bluetooth listening to true Hi-Fi stereo levels. Leveraging increased Bluetooth 5.0 range and transmission bandwidth the new and advanced aptX-HD codec sounds crisp, detailed, dynamic and excellent at all times,...

The High Power-IT is a three pin power supply with a ground connection for Pro-Ject turntables. It gets rid of ground related hum issues that can occur - especially with amplifiers that have no real ground connection. If a turntable is not properly grounded, it may have a different ground reference to the connected amplifier. Consequently, these potential differences...

The Silent Angel Forester F1 is an extremely stable and low noise power supply for 5V devices, such as the Silent Angel Bonn N8 Network Switch and Munich M1/M1T Music Streamers. It's dual outputs allows connection of two N8 Switches, or a combination of one N8 Switch and one M1/M1T Streamer.